How To Make Paracord Survival Bracelets | DIY Survival Prepping

Step 5: Now, start the second section with the free strand on the right. For the rest of the instructions from DIY Projects on how to make a paracord bracelet, click here!

4. Super Strong Paracord Survival Bracelet

This weave will stand up to just about anything with its boosted durability.

5. Ladder Rack Knot Paracord Survival Bracelet

This weave gives you more paracord than the average weave but not so much that it’s big and bulky on your wrist.

RELATED: Paracord: Everything You’ll Ever Need to Know

6. Cobra Paracord Survival Bracelet

This bracelet is nice and rugged, giving you a good amount of paracord and strength with this weave.

Supplies:

• 10 feet of paracord
• Side release buckle
• Tape Measure
• Scissors
• Lighter

Instructions:

Step 1: Once you cut your paracord to the desired length (about 10 feet), seal the end using your lighter. You don’t want to be working with a frayed end.

Now, measure your wrist size by taking one end of the paracord and wrap it around your wrist. Lay that section next to your measuring tape to see how many inches long your bracelet will be.

Step 2: Let’s first attach the male buckle to the paracord. To do this, fold your piece of paracord in half and pull the ends through the bottom slot of the buckle.

Then pull the ends through the loop created by your paracord. Pull them all the way through until the paracord is secured around the buckle.

 

Pull the ends through the buckle.

Loop the ends of the paracord back through the loop.

Pull tight to secure around the buckle.

Step 3: Now let’s attach the other end of the buckle. Pull the paracord through the slot on the buckle.

Using your measuring tape, slide the buckle along the paracord until you reach your desired bracelet length.

For this example, the bracelet is 6.5 inches. Be sure to include the center of the male end of the buckle up to the end of the female buckle in your measurements.

Pull on the second buckle to the length you measured for your wrist.

You will start your bracelet from the buckle you just threaded.

Step 4: Now we are ready to make our bracelet!

First, pull the left strand under the center pieces and over the right strand.

Then, pull the right strand over the center pieces.

Next, pull the right strand over then under and through the left strand.

After that, pull each strand outward to tighten your first knot.

Step 5: You made your first knot! Now let’s do the same thing, but start with the right strand.

Take the right strand and pull it under the center pieces and over the left strand. For the rest of the instructions from DIY Projects on how to make a paracord bracelet, click here.

7. Extra Wide Paracord Survival Bracelet

This “dragon’s tongue” weave is extra thick, meaning you have extra paracord on hand for emergencies.

8. Jagged Ladder Paracord Survival Bracelet

This is a compact weave that is sturdy but not bulky.

9. Tire Tread Paracord Survival Bracelet

This is one of the paracord survival bracelets woven for easy deployment.

Supplies:

• Two 9ft pieces of paracord
• Side release buckle
• Tape Measure
• Scissors
• Lighter

Instructions:

Step 1: For this tutorial, we are going to start with the green paracord. First, fold the green paracord in half to find the center. Take that loop and feed it through the slot on the female side of the buckle.

Pull the ends through and firmly tighten around the buckle. Fold the green paracord in half and pull the loop through the buckle.

Pull the ends all the way through the loop and tighten. Pull until the paracord is snug around the buckle.

Step 2: Let’s go ahead and do the same thing with the black paracord to attach it to the male side of the buckle.

Take the black strand of paracord and attach it the same way to the other end of the buckle. Pull it snug around the buckle.

Step 3: Now let’s prep our black paracord to attach it to the green paracord by making some bunny ear loops.

• First, you’ll want to measure the length of your bracelet using your measuring tape. Keep in mind that you want to include half of the buckle in this measurement. For this tutorial, we are making a 7-inch bracelet.
• Using your finger to keep the length of the bracelet intact, fold the two ends down to create two loops.
• Then take the right strand and pull it over the center and under the left strand.
• To finish it off, take the left strand under the center and up through the right loop.

Measure the paracord to the length you want your bracelet. Take your green paracord and fold the ends down to make two loops at the length you measured for your bracelet.

Then, pull the right strand over the center pieces and under the left strand.

Take the left strand and pull it under the center pieces and up and over the right loop. For the rest of the instructions from DIY Projects, click here.

10. Thin Soloman Bar Paracord Survival Bracelet

This is a great bracelet for those who don’t need a lot of paracord on and want a thinner bracelet.

11. Slithering Snake Paracord Survival Bracelet

This is another relatively thin bracelet for those who don’t want the bulk.

12. Oat Spike Paracord Survival Bracelet

This simple weave feels good on the wrist and is easy to deploy.

A paracord survival bracelet is a versatile tool that can come in handy for a number of emergency situations. Whether you are a survivalist, frequent hunter, outdoors person or just value the need to be prepared at all times, knowing how to tie a paracord bracelet is a great skill.

Knowing how to tie several is even better- try making the Cobra Paracord Survival Bracelet and our Tire Tread Paracord Survival Bracelet

In this tutorial, you will learn how to make the Oat Spike Survival Bracelet.

Supplies:

13. Sawtooth Paracord Survival Bracelet

This compact weave gives you a surprising amount of paracord when you deploy.

14. 90 Second Paracord Survival Bracelet

This quick bracelet deploys in 5 seconds for the ultimate quick deploy! Check out one of my favorite paracord survival bracelets equipped with multiple tools!

15. Easy Paracord Survival Bracelet

This bracelet is a great one to start out with if you’ve never made a bracelet before.

16. Shark Bone Paracord Survival Bracelet

On top of looking really cool, this weave is great for keeping a good amount of paracord on hand without too much bulk. On the other hand, this might be a bit more complicated for beginners to follow.

17. iPhone Paracord Reinforcement

Check out what we can do when we add an iPhone cord to the mix. This way, you’ll be able to strengthen your iPhone charger’s cord and have an emergency rope ready when you need it.

Make your own paracord survival bracelet from Survival Life:

With these paracord survival bracelets for your paracord survival kit, you need not to look any further. Just make sure you have all those paracord supplies with you and you’re on your way to making not just one but plenty of them.

Likewise, get your paracord survival bracelet instructions from YouTube or other videos online and also your bracelet kit to get started. Also, don’t miss other paracord ideas by checking out every paracord tutorial available.

Which among the paracord survival bracelets would you like to try? Do share your choices in the comments section below.

Up Next:

• Top 10 Reasons To Never Leave Home Without A Paracord Bracelet
• VIDEO: How to Make a Paracord Belt To Stay Prepared
• Canning Jar | How To Guide To Canning

*Editor’s Note: This post was originally published in January 2017, and has been updated for quality and relevancy.